Super Enduro Race October 26th 2013 Rules

 

 West Plains Motor Speedway Super Enduro Rules - Saturday, October 26th 2013

200 Laps or 2 hours, or down to last car running, whichever comes first.

RACE IS LIMITED TO THE 1ST 75 PAID ENTRIES. 

PURSE:  1ST - $1200, 2ND - $600, 3RD - $500, 4TH - $400, 5TH - $300, 6th - $275, 7th - $250, 8th - $200, 9th - $150, 10th - $100

Drivers and riders must be at least 17 years of age and both drivers and riders must have a valid driver's license to race in this event.  All drivers must turn in driver's license to rent transponder.  The driver's license will be returned when the transponder is returned to the race officials.  Anyone owning or having access to a transponder that works with our system may use their own transponder.

ENTRY FEE IS $100.00 PER CAR.  THIS INCLUDES DRIVER PIT PASS AND TRANSPONDER RENTAL IF PRE-ENTERED.  Riders must purchase pit pass.  All riders must come with their driver to the registration table to sign release and pay $10 rider fee.

To enter: Mail your Super Enduro Entry Form and Entry Fee Check or Money Order to: West Plains Motor Speedway, P.O. Box 715, West Plains MO 65775

Transponders will be used for scoring.  Each driver must provide a scoring spotter.YOU MUST CUT A ROUND HOLE IN THE FLOOR ON PASSENGER SIDE LOCATED NEAR BUT NOT UNDER THE SEAT WITH CLEAR VIEW OF THE GROUND. (MINIMUM 3 INCHES, MAXIMUM 4 INCHES IN DIAMETER)  TRANSPONDER MOUNTING  BRACKETS WILL BE FURNISHED BY THE TRACK.

MUFFLERS ARE MANDATORY

Car and Body 
1  Absolutely NO RACE CARS ALLOWED in this event.  That would include any car running in any division at any race track in the past or present. This race is for strictly stock cars. 
1…Any 1960 or newer 2-door or 4-door car is eligible. NO vans, NO convertibles, NO four wheel  drives, NO jeeps, NO SUV's.  The only trucks allowed are ½ ton or smaller 2-door pickup trucks. 
Cars may be rear or front wheel drive. 4, 6 or 8 cylinder engines are ok. Minimum stock wheelbase allowed 102 inches for V-8, 88 inches for V-6 or 4 cylinder. 
2…Roll cage optional but, recommended. Gutting of factory interior panels only allowed for roll cage clearance. EXAMPLE: you may remove the inner door bracing if you are replacing it with door bars. 
3…No-bracing in the bumper areas. However, bumpers should be chained or cabled as a safety item to help retain the bumper. 
4…All doors must be welded, chained, or bolted shut. 
5...Windshield must be removed.  Steel safety screen or bars on windshield opening optional but strongly recommended.  Side and rear window glass must be removed. All mirrors must be removed. 
6…Racing approved shoulder harness and lap belts are recommended. Racing seats allowed. No quick disconnect steering wheels. 
7…The rear seat shelf must be left in as a fire stop, and any openings to the trunk area must be enclosed. 
8…Complete bumper to bumper steel uni-body must be retained. No lightening permitted. 
9…The stock steel unaltered floor pan, firewalls, trunk and wheel wells must be retained. 
10…Cars must retain their strictly stock appearance, no cutting chopping, channeling, or shortening allowed. Hoods must be kept in place at all times. 
11…Gas tanks must be original and in stock mounting position.  Rupture of your gas tank and/or loss of gas will result in an immediate black flag. 
12…Batteries may be relocated in a securely fastened covered plastic or rubber container. 
13…All plastic grills must be removed or replaced with screen mesh. Headlights, tail lights, and their trim must be removed.  All outer trim must be removed. 
14…Mesh window nets are permitted, but must be removable.
15…No more than 2 people will be allowed in a 2 door vehicle and no more than 4 people will be allowed in a 4 door vehicle.  Fee is $10 per rider.
16…Mandatory 1 (one) fire extinguisher per vehicle.  If the vehicle is a 4 door and passengers are riding in the back, an additional fire extinguisher is mandatory for the back seat.  The fire extinguisher must be mounted securely to the floor board!!!! 

Car Numbers
1…The doors (front doors on 4 door vehicles) will be used to paint the car number which will be your pill draw number (your starting position).  
2…Minimum number size 18 inches tall that you must paint with bright contrasting color.  Bring your paint!  (If number is not clearly readable from the scorer's tower, your car may not be scored)

Suspension 
1…Suspension parts must remain absolutely stock for that make and model car. No spacers, lumber or chains, etc. may be used to alter stock suspension of that car. 

Wheels 
1…Stock steel or original equipment aluminum wheels only.

Tires 
1…D.O.T legal tires must pass through a 9" hoop at the bulge.  (This will be enforced on all entries including pickup trucks) No Gumball tires, NO "DOT" stamped racing tires, NO truck tires, NO all terrain tires, NO mud tires, NO treated tires, NO GROOVING OR SIPING ALLOWED.  
2...You will be allowed to change flat tires.  This must be done in designated area in the infield.  Vehicle CANNOT leave the track and return.  All equipment (tire, wheel, jack, lug wrench) must be in the vehicle at the beginning of the race and fastened securely in trunk or bed of the truck.

Weights 
1…No additional weight may be added to the car. 

Engine 
1…The engines must be strictly STOCK for that model and make and in its original mounts. NO aftermarket external oil coolers. NO TURBOS or SUPERCHARGERS. Naturally aspirated engines only. NO cold air intakes. 
2…A/C and heat components may be removed. 
3…Smog equipment may be removed.  Catalytic converter may be removed and replaced with a straight pipe. A full length exhaust system must be in place WITH MUFFLERS.
4. ..Air cleaner to oil pan must be all factory equipment.  No roller cams or rockers. Stock valve covers and oil pans only. No machining of intake or exhaust manifolds for performance purposes. Top five winners WILL be required to remove valve covers. Discrepancies will be disqualified. 

Transmission 
1…Stock transmission and rear end only. NO aftermarket external oil coolers. All transmission lines must be covered or run outside of driver area of car. 

Radiator 
1…Only one radiator can be used. Radiator must remain in original position, no coolant or gas lines in the driver area of car.

Miscellaneous

1...No locked rear ends. This means no welded rear ends, no spools, no Detroit lockers or no factory posi-tracs. Rear ends must be "open". Covers will be pulled after every race to inspect rear end. 
2…Full face helmet required.
3…If you go in the pit area outside the track during the event, you may not go back out on the track. 

Starting Position Assignment 
1…This will be determined by pill draw.  The number you draw will be your car number that will be painted on the doors (front doors of 4 door vehicles).

NOTE: NO Radios or Push-To-Talk devices may be used to communicate with driver.