|
|
GENERAL BUILDING AND RACING RULES |
|
|
|
|
1.
|
No traction - control devices in any class,
period! |
|
2.
|
All points will go to the driver, not the car!
|
|
3.
|
Anytime a car or driver is disqualified, car
and driver will have to start tailback in heats and feature for the following
two (2) weekly races. |
|
4.
|
Drinking or misconduct such as fighting could
result in suspension of car and entire crew. The management reserves the
right to refuse entry of any car, and entrance to anyone be they driver,
car owner or crew member who refuses to abide by the rules and the usual
policy of conducting auto races. |
|
5.
|
For pit admission, anyone under the age of 18 must have
a parental consent signed by parents or legal guardian. Drivers must be
at least 16 years old and have signed parental consent, if under the age
of 18.
|
|
6.
|
The management reserves the right to change
the race program or rules at any time to improve the racing program. |
|
7.
|
Any point or rule not covered herein shall
be decided by track officials and management at the necessary time and SHALL
BE FINAL!!! |
|
8.
|
Approved racing helmets are mandatory with
a "Snell" rating of at least 85. Firesuits are required by all
classes. |
|
9.
|
All cars must be equipped with approved safety
belts, no standard auto safety belts will be allowed. Shoulder harness is
mandatory. All belts must be fastened to the frame and roll cage. |
|
10.
|
Windshield openings must have a minimum of three 14/"
steel rods in front of the driver.
|
|
11.
|
All cars will have a front and rear bumper
at a reasonable height for pushing and must have a chain or steel loop device
attached to the center of the chassis, from and rear, to provide time efficient
wrecker removal. Otherwise officials will use their best judgment for efficient
track clearing. |
|
12.
|
Drivers register as they come through the pit gate. It
is NOT the track's responsibility to make sure a driver has signed in.
Track officials are not allowed to register for any driver for any reason.
All lineups will be made at designated time. If you wish to run tailback
for the night, you must tell the officials when you sign in. If any car
does not lineup for a race, all other cars will move straight forward
in the lineups.
|
|
13.
|
Race order and lineups will be posted on the
Lineup Board in the pit area. It is the driver's responsibility to know
his position. All races will be aligned on the staging pad. Drivers will
be called to lineup on staging pad by officials. Qualified cars are to be
in correct lineup and ready to start the race before entering track, or
officials are empowered to place the car tailback. |
|
14.
|
The pole care should start the race, however
this WILL BE at a reasonable speed. It does not give them the right to keep
the pace so slow that the cars behind are loaded up and about to kill their
engines. Flagman may give you the pick up speed signal. If this signal is
disregarded, the flagman may start the race at any time OR put that car
in the rear. This includes single file restarts. It is up the the two lead
cars to set an even pace so that the race is started evenly. If this cannot
be done in the first two attempts because one car or the other attempts
to get a jump or bog down the other cars, the flagman, at his discretion,
may put one or both cars to the rear. |
|
15.
|
FLAGMAN HAS COMPLETE AUTHORITY DURING THE RACE!!! |
|
16.
|
Any disputes or protests must go through the pit officials.
It must be done within 10 minutes after posting the finish. Only the car
owner or driver will be allowed to protest. NO EXCEPTIONS!!!
|
|
17.
|
Any unauthorized participant, including pit
crew member, entering flagman's stand, judge's box, or restricted office
area will cause driver to be disqualified and lose points and money for
the entire night. DRIVER IS RESPONSIBLE FOR CREW AND FAMILY MEMBERS!!! Any
person causing or becoming involved in any unsportsmanlike behavior, including
stopping on the race track to argue or protest will be suspended for the
length of time set forth by the management and/or be subjected to a fine
that would be put into a points fund. |
|
18.
|
Absolutely no race cars, tow trucks or pit
crews in the infield unless directed there by track officials. |
|
19.
|
Pit crews MUST stay in the pit area. If a car
is on the track or the entrance or exit area of the track, and a crew member
touches the car in any manner, the car can be disqualified. |
|
20.
|
All drivers, crews, etc., must attend Driver's
Meeting when announced, complete safety and additional procedures will be
thoroughly discussed and brought to every participants attention. |
|
21.
|
A Driver's Meeting will be called only when
deemed necessary, but when one is called, any drier that does not attend
forfeits any protest or discussion rights for that night. |
|
22.
|
Anyone sustaining injury in the competition
area must report the injury to the pit office by the end of the night's
program. Reporting after leaving the track will void benefits. NO EXCEPTIONS. |
|
23.
|
IT is compulsory for ALL PERSONS who enter
the pit area to sign the Release and Waiver of Liability and Indemnity Agreement.
If you have not signed this form and are injured, you will not be covered
by the track's insurance. NO EXCEPTIONS. We assume that you have read this
form when you sign it. All items (including tools, tow vehicles, races cars,
etc.,) are taken into the pit area at the owner's risk and are NOT the responsibility
of the management in any way, shape or form. |
|
24.
|
Scoring officials will only discuss procedures,
finishes and points with the competing drivers of a particular race. The
officials have the authority to disqualify a car even after the race, if
family members, car owner or pit crew causes problems for them. |
|
25.
|
The officials will gladly discuss anything
with the DRIVER ONLY! |
|
26.
|
All cars in classes in which weight, cubic
inches, tires, carburetors or inspection rules are applied, plus any car
questioned and the driver notified, must go straight to the designated inspection
area or scale station with NO stops in the pit area or elsewhere. Failure
to go directly to the inspection or scale area will result in disqualification
and the money and points earned that night will be forfeited. |
|
27.
|
The top three (3) finishers, at a minimum,
will be thoroughly checked after the race(s). |
|
28.
|
Harassment of pit officials will not be tolerated.
Such action WILL result in suspension. |
|
29.
|
Special events may be governed by different
rules. If so, amendments will be given on flyers for the event and/or at
the driver's meeting. |
|
30.
|
If for any reason a race is run short or long
the race is officially over then the checkered flag falls. |
|
31.
|
COURTESY RULE: Any car racing from another
track with minor rule differences may, at official's discretion, race on
that night, but will be notified of any necessary modifications and will
have to be legal on the next visit to the track on a regular race night. |
|
32.
|
No two-way radios will be allowed. |
|
33.
|
All cars should be numbered with large legible
numbers on both doors and on top. Numbers on door of car should be in contrasting
color from body, and should be at least 24" high. Top numbers should
be at least 24" high and also contrasting. OFFICIALS WILL NOT BE RESPONSIBLE
FOR THE SCORING OF CARS WITH ILLEGIBLE OR HARD TO READ NUMBERS. |
|
34.
|
All cars must have working starters. |
|
35.
|
Super Stocks, Hobby Cars and Trucks must have
stock floor pan and firewall back to turnup on frame. |
|
36.
|
MAKE SURE YOU HAVE THOROUGHLY READ ALL OF THE
RULES AND REGULATIONS. |
| |
In case of inclement weather 75% of purse can
be paid. |
|
|
SUPER STOCK |
|
|
|
|
1.
|
Super Stock weight rule 3300 lb.. with driver
after race. All weight must be securely fastened with two, 1/2" bolts.
Weights must be painted white with car number displayed on weight. |
|
2.
|
Any year from 1967 to current model, make of
American production car. Minimum wheel base 101". Wheel base must remain
stock according to year model. All cars must remain stock appearing. All
glass, chrome and trim must be removed. Windshields must be replaced with
protective screen and have 3 small bars in front of driver. All flammable's
must be removed. All cars must have factory bumpers front and rear. All
doors must be welded shut. Bars may be added, front and rear, to protect
radiator and gas tank. Any unibody cars must have center supports welded
to connect front and rear frame. All cars must have radiators in engine
compartment only. No square bodies and no chopped tops. Tops must be stock. |
|
3.
|
Engine setback: number 1 plug must be no further
back then ball joint. All cars must use 2 barrel carburetors. No more then
500 CRM maximum, 1 11/16 throttle bore maximum, stock Ventura (1 3/8). Holleys
- okay, headers - okay, any battery fire distributor, manual fuel pump.
No electric fuel pump. Any intake will be permitted. |
|
4.
|
All cars must have fuel cell and must be securely
fastened to the frame of the truck of the car. A rear fire wall is required
between the driver compartment and the gas tank. |
|
5.
|
All cars must have working clutch and transmission.
No Bert or aftermarket transmission. Clutch must be on crankshaft. |
|
6.
|
Front shock must be in stock position. Racing
shocks okay. No weight jacks, no torque absorbing devices and no double
shocks. |
|
7.
|
Floating axle style, rear end may be used.
Rear ends may be locked. Suspension must remain in stock position. May use
either Ford or Chevy, etc. |
|
8.
|
Tires MUST be track tire. |
|
9.
|
Large steel lug nuts on all 4 wheels, steel
wheels mandatory. 10 inch wheel maximum. No bead locks. |
|
10.
|
All drive shafts must be painted white and
have a hoop around front end of shaft. |
|
11.
|
All cars must have at least 24 inch numbers
on both sides and top. |
|
12.
|
A full 4 post roll cage is required. Roll cage
must be cross braced with a minimum of 3 bars, RECOMMENDED in both doors,
but X bar will be permitted in right door. Cage must be a minimum of 1 1/2
inch pipe of .095 thickness. Cage must be cross braced in top of X braces.
Must have original floor pan. |
|
13.
|
All cars must be equipped with racing type
seat and belts that are safety approved. All belts must be securely fastened
to the frame and roll cage. All drivers must wear safety approved firesuits
and helmets, and gloves. All cars must have a fire extinguisher within the
reach of the driver. |
|
14.
|
All cars Subject to track officials approval. |
|
|
ELIGIBLE CARS BODY SPECIFICATIONS |
|
|
|
|
1.
|
Any American coupe or sedan with 101 inch
or greater stock wheel base. NO convertibles. Stationwagons and hardtops
are okay. |
|
2.
|
Complete stock body and bumpers required. Bumpers
MUST be chained or secured to frame in a manner that will keep them from
dropping onto or dragging along track. Grill may be removed and replaced
with expanded metal. |
|
3.
|
Body and frame must maintain 4
1/2" ground clearance. All weights must be fastened with two, 1/2"
bolts. Weights must be painted white, and have car number displayed on them. |
|
4.
|
All doors MUST be welded, chained or bolted
closed. Exterior chrome MUST be removed. |
|
5.
|
All glass, including headlights, taillights,
etc., MUST be removed. WINDOW NET IS HIGHLY RECOMMENDED ON DRIVER'S DOOR
WINDOW, BUT NOT REQUIRED. |
|
6.
|
All Hobby Cars must run tack tire. |
|
7.
|
Gauges may be removed. All flammable interior
(Carpet, headliner, interior side panel, rear seats, etc.) MUST be removed.
Racing seat only! Wiring harness may be removed and replaced. |
|
8.
|
Hood and trunk may be chained or pinned down.
Windshield wipers may be removed. |
|
9.
|
Air conditioner, power steering, alternator
and heater may be removed. Holes in firewall must be covered. Battery is
to be securely fastened. |
|
10.
|
Quick release steering wheel optional and may
replace steering shaft and column. |
|
11.
|
Front fender wells may be unbolted and removed.
|
|
|
|
ELIGIBLE TRUCK BODY SPECIFICATIONS |
|
|
|
|
|
1.
|
|
BODY |
|
|
A.
|
Any GM, Ford or Chrysler full size conventional
cab pickup truck. '67 models or newer chassis year. |
|
|
B.
|
No extended cab, no step sides. |
|
|
C.
|
Two wheel, rear drive only. |
|
|
D.
|
Engine and body must match, I.E.: Ford in Ford
or GM in GM, etc. |
|
|
E.
|
All measurements shall be as referenced to
stock truck except those stated in measurement section. |
|
2.
|
|
CHASSIS |
|
|
A.
|
Any full sized GM or Ford automobile frame
may be used. |
|
|
B.
|
Frame must remain stock production in all aspects
except: behind center of rear axle housing. (Minimum of 2" x 2"
tubing on back). |
|
|
C.
|
No off-set chassis. |
|
|
D.
|
No under slung chassis. |
|
|
E.
|
Weights must be fastened with two, (2) 1/2"
bolts. Weights must be painted white, with car number painted on weights. |
|
3.
|
|
SUSPENSION |
|
|
A.
|
Stock Steering box may NOT be relocated. No
rack and 'pinion. Quick steer permitted, on truck chassis ONLY. |
|
|
B.
|
No aluminum parts. |
|
|
C.
|
Front upper and lower A-arm must be stock and
in stock location. |
|
|
D.
|
May change rear suspension, control arms from
4 to 3. Control arms must remain in stock position. |
|
|
E.
|
Heavy duty replacement shocks permitted. Must
bolt in stock location. One shock per wheel. |
|
|
F.
|
Minimum spring diameter 5 inches. |
|
|
G.
|
No coil-overs. No coil-over eliminators. |
| |
H.
|
No weight jacks. |
|
|
I.
|
Panhard bar must be welded and non-adjustable
at the track. |
|
4.
|
|
REAR END |
|
|
A.
|
Rear end must be locked. |
|
|
B.
|
8" or 9" Ford rear end may be used. |
|
|
C.
|
No floater rear ends. |
|
|
D.
|
No quick change rear ends. |
|
|
E.
|
No aluminum parts allowed. |
|
|
F.
|
Drive shafts must be painted white and must
have two (2) safety straps. |
|
5.
|
|
CLUTCH AND TRANSMISSION |
|
*
|
A.
|
Automatic or Standard transmission. Mini-clutch
okay. |
|
|
B.
|
All automatic transmissions must have torque
converter. |
|
|
C.
|
No direct drives. |
|
|
D.
|
No aftermarket transmission such as Bert. |
|
6.
|
|
WHEELS AND TIRES |
|
|
A.
|
10" maximum steel wheels only. |
|
|
B.
|
No bead locks. |
|
|
C.
|
All Hobby Stock Trucks must run track tire. |
|
|
D.
|
Tires can not be defaced in anyway, but can
be grooved. |
|
7.
|
|
FUEL CELL |
|
|
A.
|
Fuel cell mandatory. |
|
|
B.
|
NO methanol, nitro or nitrous oxide systems. |
|
|
C.
|
No electric fuel pump or pressurized systems. |
|
8.
|
|
ENGINE HOBBY CLASS RULES 12-21 APPLY PLUS |
|
|
A.
|
Engine must be located with #1 spark plug aligned
with center of ball joint. |
|
9.
|
|
IGNITION |
|
|
A.
|
Stock type ignition must be used. |
|
|
B.
|
No magnetos. No MSD or equivalent |
|
|
C.
|
No crank trigger ignition. |
|
10.
|
|
RADIATOR |
|
|
A.
|
Radiator and transmission cooler must be mounted
under hood. |
|
11.
|
|
ROLL CAGE |
|
|
A.
|
Minimum 4 point cage required, minimum 1 1/2"
tubing (1 3/4" recommended). |
|
|
B.
|
Minimum 3 bars in driver's door. |
|
|
C.
|
Roll cage must be cross braced. |
|
|
D.
|
Cage must be minimum thickness of .095. |
|
|
E.
|
Cage must be welded to frame. |
|
|
F.
|
Front and rear hoops allowed. |
|
|
G.
|
Cage hoop must be near the roof line so driver
has ease on entry and exit. |
|
|
H.
|
The only exposed bars can be rear support bars. |
|
12.
|
|
SEATS AND BELTS |
|
|
A.
|
Only high back steel or aluminum seats will
be allowed. |
|
|
B.
|
No fiberglass or plastic seats. |
|
|
C.
|
All trucks must have racing belts and shoulder
harness that are safety approved. |
|
13.
|
|
MISCELLANEOUS |
|
|
A.
|
Bed may be fastened to cab. Bed may be gutted
and covered. |
|
|
B.
|
Trucks must have dash panel. |
|
|
C.
|
Trucks must have stock fire wall. |
|
|
D.
|
Driver compartment must be fully enclosed. |
|
|
E.
|
Weight-all trucks must weight a minimum of
3300 lbs. with driver after race. |
|
14.
|
|
MEASUREMENTS |
|
|
A.
|
Wheelbase |
112" min. |
|
|
B.
|
Center of front hub to rear of cab |
76" max. |
|
|
C.
|
Rear of cab to rear of tail gate |
72" - 77 1/2" max. |
|
|
D.
|
Frame/sheet metal height |
4 1/2" min. |
|
|
E.
|
Roof height - no tolerance |
57" min. |
|
|
F.
|
Top of tail gate to ground |
37" - 39" max. |
|
|
G.
|
Top of tail gate to bottom of bumper |
30" max. |
|
|
H.
|
Spoiler height - No lips |
4" max. |
|
|
I.
|
Spoiler width - No laterals |
70" max. |
|
|
J.
|
Front air dam ground clearance |
4 1.2: min. |
|
|
|
|
| |
|
NOTES
|